ResLab Medicals

AirTouch F20 Replacement Mask Cushion

£24.99
Skip to product information
1 of 9

Only 13 left - Hurry! Limited stock left.

ResLab Medicals

AirTouch F20 Replacement Mask Cushion

AirTouch F20 Replacement Mask Cushion

Regular price £24.99 with VAT Relief
Sale price £24.99 Regular price £30.99 with VAT Relief
Sale Sold out
This product qualifies for VAT relief. Simply check the VAT Relief box in your cart, and the VAT will be automatically deducted. Read more...

Description

ResLab

ResLab Memory Foam Cushion — Compatible with AirTouch™ F20

📦 What's Included

  • 1 × ResLab Memory Foam Cushion for AirTouch F20 (size as selected)

The mask frame and headgear are not included — your existing frame and straps are reused.

Soft Memory Foam Replacement Cushion for the ResMed AirTouch™ F20 Mask

ResLab memory foam replacement cushion compatible with ResMed AirTouch F20 full face mask

The ResLab Memory Foam Cushion is designed to deliver exceptional comfort through its soft memory foam construction. Built for compatibility with the ResMed AirTouch™ F20 full face CPAP mask, it provides a secure seal and reliable therapy performance night after night — at a lower cost than a genuine ResMed foam cushion.

Memory foam is what sets this cushion apart from silicone. Where silicone presses against the skin and relies on strap tension to seal, foam moulds around your face — which is why it's so often the answer for people who get red marks, sore spots or irritation from a conventional cushion.

That softness comes with one firm rule: foam cannot be washed. It's wiped clean rather than rinsed, and it has a shorter life than silicone, so it's a cushion to reorder monthly rather than quarterly.

ResLab Compatible Part Memory Foam S / M / L AirTouch™ F20 Wipe Only — Never Wash
Important — this cushion must never be washed. Memory foam cannot be submerged, soaked or rinsed in water. Doing so destroys the foam structure permanently, usually in a single wash. Clean it only by wiping with a CPAP mask wipe. Your frame, elbow and headgear can be washed as normal — just take the cushion off first and keep it away from the sink.

Note: This is a ResLab replacement product, not manufactured by or affiliated with ResMed, designed for compatibility with the ResMed AirTouch™ F20 full face mask. The mask frame and headgear are sold separately.
Plush Memory Foam Comfort
Soft memory foam conforms gently to your facial contours, cushioning pressure points for a more comfortable night in any sleeping position.
Wipe Only, Never Wash
Foam is cared for completely differently to silicone — a mask wipe, not a sink. Washing it once will ruin it, so this is the rule to remember.
Gentle on Sensitive Skin
The soft foam surface reduces facial pressure and irritation, which makes it the usual answer when silicone leaves red marks.
Fast, Tool-Free Replacement
Snaps into your existing frame in seconds without any tools, making routine replacement quick and simple.

Key Features

✓
Soft Memory Foam Cushion — Moulds to your facial contours rather than pressing against them.
✓
Fits the ResMed AirTouch™ F20 — A compatible replacement cushion for the AirTouch F20 full face mask.
✓
Wipe Clean Only — Never wash, soak or rinse memory foam; use a CPAP mask wipe instead.*
✓
Kinder on Sensitive Skin — Often the answer where silicone causes redness, soreness or pressure marks.
✓
Secure Seal — Helps minimise mask leaks and hold a consistent seal through the night.
✓
Three Sizes — Small, Medium or Large, all fitting the same F20 frame.
✓
Tool-Free Replacement — Snaps into your existing frame in seconds.
✓
No Magnets in the Cushion — The cushion has no magnetic parts; magnetic clips sit in the F20 headgear.
✓
Latex Free — Suitable for users with a latex sensitivity.
✓
A Lower-Cost Alternative — Compatible foam at less than the price of a genuine ResMed cushion.

*Memory foam is destroyed by water. If you prefer a cushion you can wash daily, choose a silicone F20 cushion instead — they fit the same frame and are linked below.

Technical Specifications

Specification Details
Brand ResLab
Product Type Replacement CPAP Mask Cushion
Part Category Compatible Replacement Part — not manufactured by ResMed
Compatible With ResMed AirTouch™ F20 Full Face CPAP Mask (also fits AirFit™ F20 frames [CONFIRM])
Material Memory Foam
Available Sizes Small, Medium & Large
Cleaning Wipe with CPAP mask wipes only — never wash, soak or rinse
Washable No — water permanently destroys memory foam
Recommended Replacement Monthly — foam has a shorter life than silicone
Magnetic Components None in the cushion — F20 headgear uses magnetic clips
Latex Free Yes
Colour Grey
Reusable Yes — within its replacement interval
Frame & Headgear Not included — uses your existing frame and headgear
Intended Use Component of a full face mask for the treatment of Obstructive Sleep Apnoea (OSA) in Adults
Included in Package 1 × memory foam cushion (size as selected)

📏 Choosing the Right Size

All three sizes fit the same F20 frame, so changing size later never means buying a new mask — only a new cushion.

Small Medium Large
  • Replacing a worn cushion? Order the size printed on the one you're taking off
  • Foam and silicone F20 cushions share the same sizing, so switching between them means the same size
  • If you sit between two sizes, the smaller cushion usually seals better — one that's too large needs over-tightening to hold
  • Measure with a relaxed jaw and a neutral expression, not a clenched one
  • Not sure of your size? Ask us before ordering rather than after

🔄 Foam or Silicone — Which Should You Choose?

Both fit the same F20 frame, so you can switch freely. They suit different people, and they are cared for completely differently.

  • Choose memory foam if silicone leaves you with red marks, sore spots or irritated skin. It moulds instead of pressing
  • Choose silicone if you'd rather wash the cushion daily, or want a longer replacement interval at 1–3 months
  • Foam is wipe-only and monthly. Silicone is washable and lasts longer. That's the practical trade-off
  • Many people keep one of each and switch depending on how their skin is doing, especially in winter
  • Your frame, headgear and elbow stay the same either way — only the cushion changes
  • See all F20 cushions — foam and silicone

Compatibility

  • ResMed AirTouch™ F20 Full Face Mask
  • ResMed AirFit™ F20 and AirFit™ F20 For Her frames — the F20 family shares one frame platform [CONFIRM]
  • Your existing F20 frame, headgear and elbow
  • ResMed AirFit™ F30i / F30 / F40 — different platforms
  • ResMed AirFit™ N20 / AirTouch™ N20 (nasal)
  • ResMed AirFit™ N30i / P30i / P10
  • Philips, BMC, Fisher & Paykel and other non-ResMed mask systems

Cushions are not interchangeable between ResMed mask families — each is moulded to a specific frame. Check the model printed on your frame before ordering, and if you're unsure, ask us first.

💡 Fitting Tip — Reset Your Tension

A fresh foam cushion seals with far less tension than the flattened one you're taking off, so your current strap settings will be too tight — and over-tightening foam defeats the point of choosing it.

  • Loosen all four straps fully before the first night
  • Put the mask on lying down, in your usual sleeping position, with the machine running
  • Tighten in small, even steps until the leak stops — then stop, even if it still feels loose
  • Foam needs noticeably less tension than silicone; if it feels firm against your face, it's too tight
  • Keep both sides even; an uneven pull tilts the frame and opens a leak at the opposite corner
  • Press the cushion edges firmly into the frame until it snaps home with no gaps
  • Give it two or three nights — foam takes a few uses to settle to your face

🔧 Complete the Setup

Mask wipes aren't optional with a foam cushion — they're the only permitted way to clean it.

🧼 Care & Replacement Guidance

Memory foam is cared for completely differently to a silicone cushion. One wash will ruin it, so this is worth reading before the first night.

  • Never wash, soak, rinse or submerge this cushion — water destroys the foam structure, usually permanently and often in a single wash.
  • Wipe the foam surface gently with a CPAP mask wipe after each use.
  • Do not use soap, detergent, alcohol-based cleaners, antibacterial gel or bleach on the foam.
  • Never scrub the foam or use a brush on it — the surface tears easily.
  • Remove the cushion before washing your frame, elbow or headgear, and keep it away from the sink.
  • Wash your face before bed and avoid night-time moisturiser — foam absorbs facial oils readily and cannot be rinsed clean.
  • Store it dry, out of direct sunlight, and never on a radiator.
  • Inspect regularly for flattening, tearing or discolouration of the foam.
  • Replace the cushion monthly, or sooner if the foam has flattened or no longer seals.

Why Choose This Memory Foam Cushion?

Replacing a worn CPAP cushion is one of the easiest ways to improve comfort and therapy performance. This ResLab replacement pairs soft memory foam with a design built for a secure, reliable seal — helping you get a more comfortable night's sleep while keeping your AirTouch F20 mask performing at its best. Because it's a compatible part rather than a genuine ResMed one, it does that at a lower price, which matters more on foam than on silicone: foam is a monthly item, so the saving repeats every month.

  • Silicone leaves your skin red, sore or irritated
  • You get pressure marks across the nose bridge or cheeks
  • The current foam cushion has flattened and lost its spring
  • Air is escaping past your cheeks or blowing into your eyes
  • You're tightening the headgear more than you used to, just to hold a seal
  • It's simply been a month since the last change
  • You want a spare in the drawer, since foam is the shortest-lived part of the mask
  • You accidentally washed your last one — it happens, which is why it's flagged above

⚠ Important Safety Notice

This is a ResLab replacement cushion and is not manufactured by or affiliated with ResMed. It is designed for compatibility with the ResMed AirTouch™ F20 full face CPAP mask, used as part of a complete mask system for the treatment of obstructive sleep apnoea. The mask frame and headgear are not included and are sold separately.

Memory foam care is not optional:

  • Never wash, soak or submerge the cushion. Water destroys the foam permanently
  • Clean only by wiping, with a CPAP mask wipe — no soap, alcohol, antibacterial gel or bleach
  • Do not scrub or brush the foam surface
  • Do not use a cushion whose foam is torn, flattened or coming away from its base
  • Never block or modify the mask vent, which sits in the elbow and is how exhaled air leaves the mask

Confirm the cushion matches your frame model and size before use — an incorrect fit reduces seal quality and therapy effectiveness. Inspect it regularly and replace it monthly, or sooner if it has flattened or no longer seals. If you notice persistent leaks, discomfort, skin irritation or any change in mask performance after fitting, discontinue use, refit your original cushion if you still have it, and consult your CPAP provider or healthcare professional.

Disposal & Trademark Information

Disposal and the environment. Do not dispose of this product with household waste. Dispose of it in accordance with local regulations for medical devices. Packaging materials are recyclable where facilities exist.

Trademark and compatibility. AirTouch™, AirFit™ and ResMed™ are trademarks of ResMed Ltd. This product is a compatible replacement part manufactured by ResLab and is not manufactured, distributed, endorsed by, or otherwise affiliated with ResMed Ltd. All references to ResMed product names are made solely to identify the mask systems with which this cushion is designed to be compatible. Fitting a compatible part may affect any remaining manufacturer warranty on your mask system — check with your supplier or clinician if this matters to you.

Warranty T & C

🛡️ For Machines : Every eligible product you purchase is backed by a 2-year manufacturer warranty, covering manufacturing defects and workmanship under normal use.

⚠️ For Masks & Accessories : CPAP
masks and mask components are covered by a 6-month warranty against
manufacturing defects only.

*Not covered: Normal wear and tear, misuse, improper cleaning, accidental
damage, or unauthorised modifications.

📖 Read More — To view our detailed Warranty policy

Shipping & Return Policy

🚚 Free Next-Day UK Delivery : Orders placed before 3:00 PM GMT, Monday to Friday, are dispatched the same day using our next-day delivery service.

📖 Read More — To view our detailed Shipping policy

↩️ 30-Day Easy Returns : We offer a 30-day return policy on eligible items that are unused, unopened, and in their original sealed packaging. For hygiene and safety reasons, opened or used CPAP Machines, masks, cushions, and other personal-use accessories cannot be returned or replaced.

📖 Read More — To view our detailed Returns & Exchange policy

Frequently Asked Questions

Q1. Is this cushion compatible with the ResMed AirTouch F20 Full Face CPAP Mask?

A: Yes. The ResLab Replacement AirTouch F20 Cushion is specifically designed to be compatible with the ResMed AirTouch F20 Full Face CPAP Mask, providing a secure and comfortable fit.

Q2. Is this a genuine ResMed cushion?

A: No. This is a high-quality replacement cushion manufactured by ResLab. It is compatible with the ResMed AirTouch F20 Full Face CPAP Mask but is not manufactured by or affiliated with ResMed.

Q3. How often should I replace my AirTouch F20 cushion?

A: For optimal comfort, hygiene, and CPAP therapy performance, it is recommended to replace your cushion approximately every 30 days, or sooner if you notice signs of wear, damage, or reduced sealing performance.

Q4. What is included in the package?

A: Each package includes 1 × ResLab Replacement AirTouch F20 Cushion in your selected size (Small, Medium, or Large). The mask frame and headgear are not included.

View full details
AirTouch F20 Replacement Mask Cushion
AirTouch F20 Replacement Mask Cushion Large £24.99