ResMed
Only 11 left - Hurry! Limited stock left.
ResMed
Couldn't load pickup availability
Restore Comfort and Stability to Your Full Face CPAP Mask
Refresh the comfort and stability of your CPAP mask with the ResMed AirFit™ F30i & X30i Replacement Headgear. Designed exclusively for the AirFit™ F30i and AirFit™ X30i Full Face CPAP Masks, this genuine replacement headgear helps maintain a secure, personalised fit for effective and uninterrupted sleep therapy.
Headgear doesn't fail suddenly — it relaxes gradually, and most people compensate by tightening the straps a little at a time without noticing. Six months on, the mask is being pressed into the face rather than resting against it, which is a common cause of both pressure marks and new leaks. Replacing worn or stretched headgear often restores a comfortable seal that a new cushion alone could not.
Made from soft, breathable fabric with fully adjustable straps and hook-and-loop fasteners, this headgear is built for lasting overnight comfort — helping reduce mask leaks without the need for excessive tightening. Whether you're replacing worn headgear or keeping a spare on hand, it restores the original feel and performance of your mask system.
| Specification | Details |
|---|---|
| Brand | ResMed |
| Product Type | Replacement Headgear |
| Compatible Masks | ResMed AirFit™ F30i & AirFit™ X30i Full Face CPAP Masks |
| Material | Soft, Breathable Fabric |
| Adjustment | Fully Adjustable Straps |
| Attachment Type | Hook-and-Loop Fasteners |
| Colour | Grey |
| Latex-Free | Yes |
| Reusable | Yes |
| Not Included | Mask Frame, Cushion, Elbow Connector, CPAP Tubing, Machine |
| Suggested Replacement Interval | Every 3–6 months, or sooner if stretched, frayed, or no longer holding adjustment |
| Washing | Hand wash only — do not machine wash, tumble dry or iron |
| Intended Use | Component of a CPAP mask system for Obstructive Sleep Apnoea therapy |
| Warranty | Manufacturer Warranty (where applicable) |
This replacement headgear is designed exclusively for the ResMed AirFit™ F30i and AirFit™ X30i Full Face CPAP Masks. Please confirm your mask model before purchasing.
The most common mistake when fitting new headgear is adjusting it to match the tightness of the old set. Your old straps had stretched, so copying that tension leaves the new headgear far too tight from the very first night — which brings back the pressure marks you were trying to solve.
Headgear rarely wears out alone. If yours has stretched, these parts are usually due at the same time.
Regular cleaning and timely replacement keep your headgear comfortable and your mask performing at its best.
Headgear naturally stretches and loses elasticity over time, which can lead to a looser fit, increased mask leaks, and disrupted therapy. Replacing your headgear regularly is one of the simplest and most cost-effective ways to maintain a secure, comfortable mask fit. Compatible with both the AirFit F30i and X30i, this soft, adjustable, latex-free replacement headgear restores the stability your mask was designed to deliver — so you can focus on getting a better night's sleep.
The ResMed AirFit™ F30i mask system uses magnetic headgear clips, which may interfere with certain implanted medical devices or metallic implants — including metallic haemostatic clips in the head and metallic splinters in the eye.
If you require a magnet-free setup for medical reasons, contact us to confirm the clip type on this headgear before ordering, read the magnet contraindications document linked below, and consult your healthcare provider. Do not assume a replacement part changes the magnetic components of your mask system either way.
This is a replacement accessory for use as part of a complete, compatible ResMed AirFit™ F30i or AirFit™ X30i Full Face Mask system, used for CPAP or bilevel therapy prescribed by a qualified healthcare professional.
Adjust the straps evenly and avoid overtightening, as this can cause pressure marks or reduce seal quality rather than improve it. Inspect the headgear regularly for stretched fabric or frayed edges. Always consult your clinician or refer to the manufacturer's instructions before use, and contact your CPAP provider if persistent leaks, skin irritation or discomfort continue after fitting.
Download the official ResMed documents for the AirFit F30i mask system, including fitting instructions and magnet safety information.
🛡️ For Machines : Every eligible product you purchase is backed by a 2-year manufacturer warranty, covering manufacturing defects and workmanship under normal use.
⚠️ For Masks & Accessories : CPAP
masks and mask components are covered by a 6-month warranty against
manufacturing defects only.
*Not covered: Normal wear and tear, misuse, improper cleaning, accidental
damage, or unauthorised modifications.
🚚 Free Next-Day UK Delivery : Orders placed before 3:00 PM GMT, Monday to Friday, are dispatched the same day using our next-day delivery service.
📖 Read More — To view our detailed Shipping policy
↩️ 30-Day Easy Returns : We offer a 30-day return policy on eligible items that are unused, unopened, and in their original sealed packaging. For hygiene and safety reasons, opened or used CPAP Machines, masks, cushions, and other personal-use accessories cannot be returned or replaced.
📖 Read More — To view our detailed Returns & Exchange policy
Sign up for exclusive CPAP discounts, rewards, and early access to sleep solutions.
