ResLab Medicals

AirFit F20 Replacement Cushion - 2 Pack

£14.49
Skip to product information
1 of 9

Only 32 left - Hurry! Limited stock left.

ResLab Medicals

AirFit F20 Replacement Cushion - 2 Pack

AirFit F20 Replacement Cushion - 2 Pack

Regular price £14.49 with VAT Relief
Sale price £14.49 Regular price £21.99 with VAT Relief
Sale Sold out
This product qualifies for VAT relief. Simply check the VAT Relief box in your cart, and the VAT will be automatically deducted. Read more...

Description

ResLab
Pack of 2 — Better Value

ResLab Silicone Cushion (Pack of 2) — Compatible with AirFit™ F20

📦 What's Included

  • 2 × ResLab Silicone Replacement Cushions — both in the size you select

The mask frame and headgear are not included — your existing frame and straps are reused.

Premium CPAP Replacement Cushions for a Secure, Comfortable Fit

This pack of two ResLab silicone cushions is designed for compatibility with the ResMed AirFit™ F20 and AirFit™ F20 For Her full face CPAP masks. Made from medical-grade silicone, each cushion adapts to a wide range of facial shapes to create a secure seal and help reduce air leaks, so your CPAP machine can deliver consistent therapy through the night.

The cushion is the part of your mask that does the sealing, and it's also the part that wears out first. Silicone softens and stretches with nightly use, facial oils and washing, and once it loses its shape the seal starts to break — usually showing up as air hissing past your cheeks, water in your eyes, a mask you keep tightening, or leak figures creeping up on your machine.

Buying two at a time means the next one is already in the drawer when that happens, rather than a fortnight of poor sleep while a replacement is in the post.

Pack of 2 Medical-Grade Silicone S / M / L AirFit F20 & F20 For Her Fully Washable
Better value: Buying as a pack of two means you always have a fresh cushion ready to go — a lower cost per cushion, and no gap in your replacement schedule waiting on a reorder.
Both cushions are the size you select. If you want to compare two different sizes, order singly from our single-cushion listing instead.

Note: This is a ResLab replacement product, not manufactured by or affiliated with ResMed, designed for compatibility with the ResMed AirFit™ F20 and AirFit™ F20 For Her full face masks. The mask frame and headgear are sold separately.
Always a Spare on Hand
With two cushions included, there's always a fresh replacement ready — no waiting on a reorder, and no compromising your therapy while one is in the post.
Reliable Seal Every Night
Medical-grade silicone adapts to a wide range of facial contours, creating a secure, low-leak seal that supports consistent therapy from the first breath to the last.
Designed for Comfort
Soft, flexible silicone conforms gently to your face while minimising pressure points and skin irritation, in any sleeping position.
Fully Washable
Unlike memory foam cushions, silicone washes daily in warm soapy water — which is the main reason many people prefer it.

Key Features

✓
Pack of Two Cushions — Two replacement cushions included, so you're never without a fresh one on hand.
✓
Fits ResMed AirFit™ F20 and F20 For Her — A compatible replacement for both full face mask versions.
✓
Premium Medical-Grade Silicone — Soft, flexible material that seals gently without causing irritation or pressure marks.
✓
Reduces Air Leaks — An adaptive cushion design helps maintain a dependable seal across a range of face shapes.
✓
Fully Washable — Washes daily in warm soapy water, unlike memory foam cushions which must only be wiped.
✓
Lightweight & Low-Profile — Comfortable sleep across all positions without added bulk.
✓
Tool-Free Removal & Replacement — Snaps on and off for quick daily cleaning and routine swaps.
✓
Both in Your Chosen Size — Small, Medium or Large; both cushions match the size you select.
✓
No Magnets in the Cushions — The cushions have no magnetic parts; magnetic clips sit in the F20 headgear.
✓
Better Value Than Buying Singly — A lower cost per cushion on the part you replace most often.

Technical Specifications

Specification Details
Brand ResLab
Product Name ResLab Silicone Replacement Cushion — Pack of 2
Product Type Full Face CPAP Replacement Cushions
Part Category Compatible Replacement Part — not manufactured by ResMed
Compatible With ResMed AirFit™ F20 & AirFit™ F20 For Her Full Face CPAP Masks
Material Premium Medical-Grade Silicone
Available Sizes Small, Medium & Large
Pack Quantity 2 cushions, both in the selected size
Mixed Sizes in a Pack Not available — both cushions are the size selected
Washable Yes — daily, in warm water with a mild soap
Recommended Replacement Every 1–3 months per cushion, or as advised by your healthcare provider
Magnetic Components None in the cushions — F20 headgear uses magnetic clips
Latex Free Yes
Storage Keep the spare sealed, dry and out of direct sunlight until needed
Frame & Headgear Not included — uses your existing frame and headgear
Intended Use Components of a full face mask for the treatment of Obstructive Sleep Apnoea (OSA) in Adults
Included in Package 2 × replacement cushions (both in the size selected)

📏 Choosing the Right Size

All three sizes fit the same F20 frame, so changing size later never means buying a new mask — only a new cushion. Both cushions in this pack are the size you select.

Small Medium Large
  • Replacing a worn cushion? Order the size printed on the one you're taking off
  • Silicone and memory foam F20 cushions share the same sizing, so a size carries straight across
  • If you sit between two sizes, the smaller cushion usually seals better — one that's too large needs over-tightening to hold
  • Measure with a relaxed jaw and a neutral expression, not a clenched one
  • Not certain of your size yet? Buy a single cushion first and come back for the pack once you've confirmed the fit
  • Want to compare two sizes side by side? Order two singles rather than this pack

🔄 Silicone or Memory Foam?

Both fit the same F20 frame, so you can switch freely. They suit different people, and they are cared for completely differently.

  • Choose silicone — this cushion — if you want to wash it daily and get a longer replacement interval
  • Choose memory foam if silicone leaves you with red marks, sore spots or irritated skin. Foam moulds instead of pressing
  • Silicone is washable and lasts 1–3 months. Foam is wipe-only and monthly. That's the practical trade-off
  • Many people keep one of each and switch depending on how their skin is doing, especially in winter
  • Your frame, headgear and elbow stay the same either way — only the cushion changes
  • See all F20 cushions — silicone and foam, singles and packs

Compatibility

  • ResMed AirFit™ F20 Full Face Mask
  • ResMed AirFit™ F20 For Her Full Face Mask
  • ResMed AirTouch™ F20 frames — the F20 family shares one frame platform [CONFIRM]
  • Your existing F20 frame, headgear and elbow
  • ResMed AirFit™ F30i / F30 / F40 — different platforms
  • ResMed AirFit™ N20 / AirTouch™ N20 (nasal)
  • ResMed AirFit™ N30i / P30i / P10
  • Philips, BMC, Fisher & Paykel and other non-ResMed mask systems

Cushions are not interchangeable between ResMed mask families — each is moulded to a specific frame. Check the model printed on your frame before ordering, and if you're unsure, ask us first.

💡 Fitting Tip — Reset Your Tension

A fresh cushion seals with far less tension than the worn one you're taking off, so your current strap settings will be too tight.

  • Loosen all four straps fully before the first night on a new cushion
  • Put the mask on lying down, in your usual sleeping position, with the machine running
  • Tighten in small, even steps until the leak stops — then stop, even if it still feels loose
  • Keep both sides even; an uneven pull tilts the frame and opens a leak at the opposite corner
  • Press the cushion edges firmly into the frame until it snaps home with no gaps
  • Do the same again when you fit the second cushion; a fresh one always needs less tension than the one it replaced
  • If a leak persists with a new cushion, check the frame for hairline cracks and the headgear for stretch

🔧 Complete the Setup

The cushion wears fastest, but it isn't the only part on a schedule. If a new cushion hasn't fully fixed a leak, stretched headgear is usually the culprit.

🧼 Cleaning Instructions

Regular cleaning extends the life of each cushion and helps maintain hygiene for safe, effective therapy. Silicone is fully washable — unlike memory foam, which must only be wiped.

  • Remove the cushion from the mask frame before cleaning.
  • Wash daily in warm water with a mild, non-abrasive, unscented soap.
  • Rub the sealing membrane gently between your fingers to lift facial oils, which are what make silicone go slack.
  • Rinse thoroughly to remove all soap residue, which irritates skin and shortens the cushion's life.
  • Air dry away from direct sunlight; UV degrades silicone and hardens the sealing edge.
  • Do not use alcohol-based cleaners, bleach or abrasive cloths, as these damage the silicone.
  • Keep the second cushion sealed, dry and out of sunlight until you need it.
  • If you prefer, alternate between the two cushions so there's always a dry one ready — replace both on the same schedule either way.
  • Wash your face before bed and skip night-time moisturiser — facial oils are the main cause of early cushion failure.
  • Replace a cushion every 1–3 months, or sooner if it appears worn, discoloured, stiff or begins to leak.

Why Choose the Pack of Two?

Replacing your CPAP cushion is one of the simplest ways to improve your therapy experience, and it's the part that wears fastest. This pack combines premium medical-grade silicone with a design built for comfort and seal integrity, and gives you the peace of mind of a spare always on hand — at a lower cost per cushion than buying singly. Whether you're staying ahead of your replacement schedule or just want a backup ready to go, two at a time matches how the part actually behaves.

  • Air is escaping past your cheeks or blowing into your eyes
  • You're tightening the headgear more than you used to, just to hold a seal
  • Leak figures on your machine have crept up over recent weeks
  • The sealing edge feels slack, sticky, stiff or has gone cloudy
  • You've been caught before with a worn cushion and nothing to replace it with
  • You'd rather order a few times a year than every month
  • You want the lower per-cushion price on the part you replace most often
  • You travel and want a spare that lives in the bag

⚠ Important Safety Notice

These are ResLab replacement cushions and are not manufactured by or affiliated with ResMed. They are components of a medical device used for the treatment of obstructive sleep apnoea under the direction of a qualified healthcare professional, and are designed for compatibility with the ResMed AirFit™ F20 and AirFit™ F20 For Her full face masks. The mask frame and headgear are not included and are sold separately.

Confirm the cushions match your exact frame model and size before use — an incorrect fit reduces seal quality and therapy effectiveness. Inspect each cushion regularly for cracking, stiffening or discolouration and replace it if the seal is compromised. Never block or modify the mask vent, which sits in the elbow and is how exhaled air leaves the mask.

Please read the full product documentation before use, and consult your clinician or CPAP supplier if you are unsure which cushion or size is right for your prescribed therapy. If you notice persistent leaks, discomfort, skin irritation or any change in mask performance after fitting, discontinue use, refit your original cushion if you still have it, and consult your CPAP provider or healthcare professional.

Disposal & Trademark Information

Disposal and the environment. Do not dispose of this product with household waste. Dispose of it in accordance with local regulations for medical devices. Packaging materials are recyclable where facilities exist.

Trademark and compatibility. AirFit™, AirTouch™ and ResMed™ are trademarks of ResMed Ltd. This product is a compatible replacement part manufactured by ResLab and is not manufactured, distributed, endorsed by, or otherwise affiliated with ResMed Ltd. All references to ResMed product names are made solely to identify the mask systems with which these cushions are designed to be compatible. Fitting a compatible part may affect any remaining manufacturer warranty on your mask system — check with your supplier or clinician if this matters to you.

Warranty T & C

🛡️ For Machines : Every eligible product you purchase is backed by a 2-year manufacturer warranty, covering manufacturing defects and workmanship under normal use.

⚠️ For Masks & Accessories : CPAP
masks and mask components are covered by a 6-month warranty against
manufacturing defects only.

*Not covered: Normal wear and tear, misuse, improper cleaning, accidental
damage, or unauthorised modifications.

📖 Read More — To view our detailed Warranty policy

Shipping & Return Policy

🚚 Free Next-Day UK Delivery : Orders placed before 3:00 PM GMT, Monday to Friday, are dispatched the same day using our next-day delivery service.

📖 Read More — To view our detailed Shipping policy

↩️ 30-Day Easy Returns : We offer a 30-day return policy on eligible items that are unused, unopened, and in their original sealed packaging. For hygiene and safety reasons, opened or used CPAP Machines, masks, cushions, and other personal-use accessories cannot be returned or replaced.

📖 Read More — To view our detailed Returns & Exchange policy

Frequently Asked Questions

Q: What is included in this replacement package?
A: This package includes 2 × ResLab AirFit™ F20 Replacement Cushion in your selected size (Small, Medium, or Large). The mask frame, headgear, elbow assembly, CPAP tubing, and CPAP machine are not included.

Q: Is this replacement cushion compatible with all AirFit™ F20 masks?
A: Yes. This ResLab replacement cushion is designed to be compatible with the ResMed AirFit F20 Full Face CPAP Mask and AirFit™ F20 For Her mask systems. Please confirm your mask model before ordering.

Q: How often should I replace the AirFit™ F20 cushion?
A: For the best seal, comfort, and CPAP therapy performance, it is recommended to replace the cushion approximately every month, or sooner if it becomes worn, discoloured, or starts to leak.

Q: Is this a genuine ResMed product?
A: No. This is a ResLab compatible replacement cushion. It is not manufactured by or affiliated with ResMed, but is designed to be compatible with the ResMed AirFit™ F20 and AirFit™ F20 For Her Full Face CPAP Mask systems.

View full details
AirFit F20 Replacement Cushion - 2 Pack
AirFit F20 Replacement Cushion - 2 Pack Pack of 2 - Large £14.49