ResLab Medicals

AirFit F20 Replacement Cushion

£8.99
Skip to product information
1 of 8

Only 35 left - Hurry! Limited stock left.

ResLab Medicals

AirFit F20 Replacement Cushion

AirFit F20 Replacement Cushion

Regular price £8.99 with VAT Relief
Sale price £8.99 Regular price £25.80 with VAT Relief
Sale Sold out
This product qualifies for VAT relief. Simply check the VAT Relief box in your cart, and the VAT will be automatically deducted. Read more...

Description

ResLab

ResLab Silicone Cushion — Compatible with AirFit™ F20

📦 What's Included

  • 1 × ResLab Silicone Replacement Cushion (in the size you select)

The mask frame and headgear are not included — your existing frame and straps are reused.

Premium CPAP Replacement Cushion for a Secure, Comfortable Fit

ResLab silicone replacement cushion, compatible with the ResMed AirFit F20 full face mask

A ResLab silicone replacement cushion designed for compatibility with the ResMed AirFit™ F20 and AirFit™ F20 For Her full face CPAP masks. Made from medical-grade silicone, it adapts to a wide range of facial shapes to create a secure seal and help reduce air leaks, so your machine can deliver consistent therapy throughout the night.

The cushion is the only part of your mask that touches your face all night, and it's the part that wears out first. Silicone softens and stretches with nightly use, facial oils and washing, and once it loses its shape the seal starts to break down — air hissing past your cheeks, water running into your eyes, a mask you keep tightening, or leak figures creeping up on your machine.

Replacing the cushion restores the seal and the comfort for a fraction of the cost of a new mask. Your frame, headgear and strap settings all stay as they are — only the sealing part is renewed.

Fits AirFit F20 & F20 For Her Medical-Grade Silicone S / M / L Fully Washable Latex Free No Magnets in Cushion Also in 2, 3 & 5 Packs
Note: This is a ResLab replacement cushion, not manufactured by or affiliated with ResMed, designed for compatibility with the ResMed AirFit™ F20 and AirFit™ F20 For Her full face masks. The mask frame and headgear are sold separately.

Buying your first one? Start here rather than with a multipack — confirm the size and the fit on a single cushion, then switch to a 2, 3 or 5 pack once you know what works.

Magnets: this cushion contains no magnets — but the F20 headgear uses magnetic clips, so the assembled mask is not magnet-free. If you have an implanted medical device, read the safety notice below.
Reliable Seal Every Night
Medical-grade silicone adapts to a wide range of facial contours, creating a secure, low-leak seal that supports consistent therapy from the first breath to the last.
Designed for Comfort
Soft, flexible silicone gently conforms to your face while minimising pressure points and skin irritation, so you can sleep comfortably in any position.
Restores Therapy Performance
A properly sealing cushion reduces leaks and supports effective pressure delivery. Replacing on schedule keeps your machine working as it was set up to.
Swaps in Seconds
Fits with no tools and no clips, so daily cleaning and routine replacement take moments — and your existing strap settings stay where they are.

Key Features

✓
Fits ResMed AirFit™ F20 and F20 For Her — A compatible replacement for both full face mask versions.
✓
Premium Medical-Grade Silicone — Soft, flexible material that seals gently against the skin without causing irritation or pressure marks.
✓
Reduces Air Leaks — An adaptive cushion design helps maintain a dependable seal across a range of face shapes.
✓
Lightweight & Low-Profile — Comfortable sleep across all positions, with nothing bulky to press against the pillow.
✓
Tool-Free Removal & Replacement — Snaps on and off for quick daily cleaning and routine swaps.
✓
Three Sizes Available — Small, Medium or Large, so you can match the size printed on your current cushion.
✓
Fully Washable — Washes daily in warm soapy water, unlike memory foam cushions which must only be wiped.
✓
Latex Free — No natural rubber latex in the cushion.
✓
No Magnets in the Cushion — The cushion contains no magnetic components. Note the F20 headgear does use magnetic clips.
✓
Available in Multipacks — Once you know your size, 2, 3 and 5 packs cover several replacement cycles at a lower cost per cushion.

Technical Specifications

Specification Details
Brand ResLab
Manufacturer ResLab Medicals
Part Category Compatible Replacement Part — not manufactured by ResMed
Product Name ResLab Silicone Replacement Cushion (F20 Compatible)
Product Type Full Face CPAP Replacement Cushion
Compatible With ResMed AirFit™ F20 & AirFit™ F20 For Her Full Face CPAP Masks
Material Premium Medical-Grade Silicone
Available Sizes Small, Medium & Large
Pack Quantity 1 cushion — also available in 2, 3 and 5 packs
Recommended Replacement Every 1–3 months, or as advised by your healthcare provider
Washable Yes — daily, in warm water with a mild soap
Latex Free Yes
Magnets in This Cushion None
Magnets Elsewhere in the F20 Mask Yes — the F20 headgear uses magnetic clips
Frame & Headgear Not included — uses your existing frame and headgear
Intended Use Component of a full face mask for the treatment of Obstructive Sleep Apnoea (OSA) in Adults
Included in Package 1 × Replacement cushion (selected size)

Which Pack Size Suits You?

The cushion is identical in all four — only the quantity and the cost per cushion change. Start with a single if there's any doubt about your size, then move up once you know what fits.

Single Cushion

Choose this if you're new to the F20 or not certain of your size. Confirm the fit on one before committing to a pack.

Pack of 2

Choose this if you know your size and want a spare on hand without stocking up — two replacement cycles covered.

Pack of 3

Choose this if you're settled on your size and want a few cycles covered without buying a year ahead.

Pack of 5

Choose this if you're a long-term F20 user, certain of your size and staying with silicone — the lowest cost per cushion and over a year of cover.

See all F20 cushions — silicone and memory foam, singles and multipacks.

📏 Choosing the Right Size

All three sizes fit the same F20 frame, so changing size later never means buying a new mask — only a new cushion. That's exactly why a single is the right first purchase.

Small Medium Large
  • Replacing a worn cushion? Order the size printed on the one you're taking off
  • Silicone and memory foam F20 cushions share the same sizing, so a size carries straight across
  • If you sit between two sizes, the smaller cushion usually seals better — one that's too large needs over-tightening to hold
  • Measure with a relaxed jaw and a neutral expression, not a clenched one
  • Want to compare two sizes side by side? Order two singles rather than a pack — packs come in one size only
  • New to the F20 and unsure? Message us with your mask details before ordering

🔄 Silicone or Memory Foam?

Both fit the same F20 frame, so you can switch freely. They suit different people, and they are cared for completely differently.

  • Choose silicone — this cushion — if you want to wash it daily and get a longer replacement interval
  • Choose memory foam if silicone leaves you with red marks, sore spots or irritated skin. Foam moulds instead of pressing
  • Silicone is washable and lasts 1–3 months. Foam is wipe-only and monthly. That's the practical trade-off
  • Your frame, headgear and elbow stay the same either way — only the cushion changes
  • Not sure which suits you? A single of each costs less than committing to a pack of the wrong one
  • See all F20 cushions — silicone and foam

Compatibility

  • ResMed AirFit™ F20 Full Face Mask
  • ResMed AirFit™ F20 For Her Full Face Mask
  • ResMed AirTouch™ F20 frames — the F20 family shares one frame platform [CONFIRM]
  • Your existing F20 frame, headgear and elbow
  • ResMed AirFit™ F30i / F30 / F40 — different platforms
  • ResMed AirFit™ N20 / AirTouch™ N20 (nasal)
  • ResMed AirFit™ N30i / P30i / P10
  • Philips, BMC, Fisher & Paykel and other non-ResMed mask systems

Cushions are not interchangeable between ResMed mask families — each is moulded to a specific frame. Check the model printed on your frame before ordering, and if you're unsure, ask us first.

💡 Fitting Tip — Reset Your Tension

A fresh cushion seals with far less tension than the worn one you're taking off, so your current strap settings will be too tight. Over-tightening a new cushion is the fastest way to wear it out early.

  • Loosen all four straps fully before the first night on a new cushion
  • Put the mask on lying down, in your usual sleeping position, with the machine running
  • Tighten in small, even steps until the leak stops — then stop, even if it still feels loose
  • Keep both sides even; an uneven pull tilts the frame and opens a leak at the opposite corner
  • Press the cushion edges firmly into the frame until it snaps home with no gaps
  • If a leak persists with a new cushion, check the frame for hairline cracks and the headgear for stretch — a worn frame or stretched straps make a new cushion leak

🔧 Complete the Rebuild

The cushion wears fastest, but it isn't the only part with a schedule. If your mask is more than six months old, the cushion may not be the only thing causing the leak.

  • F20 Headgear — elastic stretches gradually; replace around every 6 months. Stretched headgear is often mistaken for a worn cushion
  • F20 Frames & Elbow Connectors — replace every 6–12 months, or sooner if cracked
  • Memory Foam F20 Cushions — the alternative on the same frame, if silicone irritates your skin
  • CPAP Mask Wipes — a nightly wipe lifts facial oils, which are the main cause of early cushion failure
  • CPAP Tubing — replace every 3 months

🧼 Cleaning Instructions

Regular cleaning extends the life of your cushion and helps maintain hygiene for safe, effective therapy. Silicone is fully washable — unlike memory foam, which must only be wiped.

  • Remove the cushion from the mask frame before cleaning.
  • Wash daily in warm water with a mild, non-abrasive, unscented soap.
  • Rub the sealing membrane gently between your fingers to lift facial oils, which are what make silicone go slack.
  • Rinse thoroughly to remove all soap residue, which irritates skin and shortens the cushion's life.
  • Air dry away from direct sunlight; UV degrades silicone and hardens the sealing edge.
  • Do not use alcohol-based cleaners, bleach, dishwashers or abrasive cloths, as these damage the silicone.
  • Wash your face before bed and skip night-time moisturiser — facial oils are the main cause of early cushion failure.
  • Replace the cushion every 1–3 months, or sooner if it appears worn, discoloured, stiff or begins to leak.

Why Choose This Cushion?

Replacing your CPAP cushion is one of the simplest ways to improve your therapy experience, and it's the part that wears fastest. This ResLab cushion combines premium medical-grade silicone with a design built for comfort, seal integrity and ease of use — and because your frame and headgear stay as they are, your fit doesn't need relearning. Whether you're replacing a worn cushion or keeping a spare on hand, it delivers the reliable seal your therapy depends on. Once you've confirmed your size, the 2, 3 and 5 packs bring the cost per cushion down considerably.

  • Air is escaping past your cheeks or blowing into your eyes
  • You're tightening the headgear more than you used to, just to hold a seal
  • The sealing edge feels slack, sticky, stiff or has gone cloudy
  • Your machine's leak figures have crept up over recent weeks
  • You're waking with red marks or sore spots that weren't there before
  • Your cushion is past the 1–3 month mark and due on schedule
  • You want a spare in the drawer, or one that lives permanently in the travel bag
  • The rest of the mask is in good order and only the cushion needs renewing

⚠ Important Safety Notice

This is a ResLab replacement cushion and is not manufactured by or affiliated with ResMed. It is a component of a medical device used for the treatment of obstructive sleep apnoea under the direction of a qualified healthcare professional, and is designed for compatibility with the ResMed AirFit™ F20 and AirFit™ F20 For Her full face masks. The mask frame and headgear are not included and are sold separately.

Magnets and implanted medical devices. This cushion contains no magnets. However, the AirFit F20 headgear uses magnetic clips, so the assembled mask is not magnet-free. Magnets can interfere with implanted devices and metallic implants. Consult your doctor and your device manufacturer before using a mask with magnetic clips if you or anyone sharing your bed has:

  • A pacemaker, implantable cardioverter-defibrillator (ICD) or other active implant
  • A neurostimulator or CSF shunt with an adjustable (programmable) valve
  • Haemostatic clips, embolic coils or aneurysm clips
  • Metallic splinters in or near the eye
  • A cochlear implant, insulin pump or magnetic metallic implant
  • Any metallic device or implant in the head or torso

If any of these apply, speak to your clinician about ResMed's non-magnetic (NM) headgear options before use, and keep magnetic components at least 150 mm from any implanted device.

Confirm the cushion matches your exact frame model and size before use — an incorrect fit reduces seal quality and therapy effectiveness. Do not share a cushion between users; cushions are single-user items. Inspect the cushion regularly for cracking, stiffening or discolouration and replace it if the seal is compromised. Never block or modify the mask vent, which sits in the elbow and is how exhaled air leaves the mask; a blocked vent allows carbon dioxide to build up inside the mask.

Please refer to the official AirFit F20 user guide supplied with your mask for complete information on contraindications, warnings, precautions and instructions for use, and consult your healthcare provider to confirm this product is appropriate for your therapy needs. If you notice persistent leaks, discomfort, skin irritation or any change in mask performance after fitting, discontinue use and consult your CPAP provider or healthcare professional.

Disposal & Trademark Information

Disposal and the environment. Do not dispose of this product with household waste. Dispose of it in accordance with local regulations for medical devices. Packaging materials are recyclable where facilities exist.

Trademark and compatibility. AirFit™, AirTouch™ and ResMed™ are trademarks of ResMed Ltd. This product is a compatible replacement part manufactured by ResLab Medicals and is not manufactured, distributed, endorsed by, or otherwise affiliated with ResMed Ltd. All references to ResMed product names are made solely to identify the mask systems with which this cushion is designed to be compatible. Fitting a compatible part may affect any remaining manufacturer warranty on your mask system — check with your supplier or clinician if this matters to you.

Warranty T & C

🛡️ For Machines : Every eligible product you purchase is backed by a 2-year manufacturer warranty, covering manufacturing defects and workmanship under normal use.

⚠️ For Masks & Accessories : CPAP
masks and mask components are covered by a 6-month warranty against
manufacturing defects only.

*Not covered: Normal wear and tear, misuse, improper cleaning, accidental
damage, or unauthorised modifications.

📖 Read More — To view our detailed Warranty policy

Shipping & Return Policy

🚚 Free Next-Day UK Delivery : Orders placed before 3:00 PM GMT, Monday to Friday, are dispatched the same day using our next-day delivery service.

📖 Read More — To view our detailed Shipping policy

↩️ 30-Day Easy Returns : We offer a 30-day return policy on eligible items that are unused, unopened, and in their original sealed packaging. For hygiene and safety reasons, opened or used CPAP Machines, masks, cushions, and other personal-use accessories cannot be returned or replaced.

📖 Read More — To view our detailed Returns & Exchange policy

Frequently Asked Questions

Q: What is included in this replacement package?
A: This package includes 1 × ResLab AirFit™ F20 Replacement Cushion in your selected size (Small, Medium, or Large). The mask frame, headgear, elbow assembly, CPAP tubing, and CPAP machine are not included.

Q: Is this replacement cushion compatible with all AirFit™ F20 masks?
A: Yes. This ResLab replacement cushion is designed to be compatible with the ResMed AirFit F20 Full Face CPAP Mask and AirFit™ F20 For Her mask systems. Please confirm your mask model before ordering.

Q: How often should I replace the AirFit™ F20 cushion?
A: For the best seal, comfort, and CPAP therapy performance, it is recommended to replace the cushion approximately every month, or sooner if it becomes worn, discoloured, or starts to leak.

Q: Is this a genuine ResMed product?
A: No. This is a ResLab compatible replacement cushion. It is not manufactured by or affiliated with ResMed, but is designed to be compatible with the ResMed AirFit™ F20 and AirFit™ F20 For Her Full Face CPAP Mask systems.

View full details
AirFit F20 Replacement Cushion
AirFit F20 Replacement Cushion Large £8.99