ResLab Medicals

CPAP Hose Cleaning Brush Kit - 7ft Long, 15mm/19mm Diameter

£13.99
Skip to product information
1 of 10

Only 20 left - Hurry! Limited stock left.

ResLab Medicals

CPAP Hose Cleaning Brush Kit - 7ft Long, 15mm/19mm Diameter

CPAP Hose Cleaning Brush Kit - 7ft Long, 15mm/19mm Diameter

Regular price £13.99 with VAT Relief
Sale price £13.99 Regular price £15.99 with VAT Relief
Sale Sold out
This product qualifies for VAT relief. Simply check the VAT Relief box in your cart, and the VAT will be automatically deducted. Read more...

Description

CPAP Cleaning Accessory

CPAP Hose Cleaning Brush Kit

📦 What's Included

  • 1 × 7 ft (2.1 m) Flexible CPAP Hose Cleaning Brush
  • 1 × 15 mm Tube Cleaning Brush

Two Brushes — a 7 ft Flexible Hose Brush and a 15 mm Tube Brush

CPAP hose cleaning brush kit with 7ft flexible brush and 15mm tube brush

Keep your CPAP equipment clean and performing at its best with the CPAP Hose Cleaning Brush Kit. Designed to remove dust, moisture and residue from CPAP tubing and connectors, it helps maintain hygiene and prolong the life of your sleep therapy equipment.

Rinsing a hose through is the usual approach, and it isn't enough. Water runs along the bottom of the tube and leaves the rest untouched, which is why the inside of a hose that gets rinsed every week can still go cloudy, develop a smell, or grow a visible film — especially if you use a humidifier, which keeps the inside of the tube damp all night.

The 7 ft (2.1 m) flexible brush is the one for the hose itself: it reaches the full length of a standard 6 ft tube with room to spare, and the soft nylon bristles clean thoroughly without scratching. The shorter 15 mm brush handles the narrow parts the long brush is unwieldy for — slimline tubing, mask elbows, connectors and humidifier outlets.

Suitable for most CPAP, APAP and BiPAP tubing, this kit is a straightforward way to keep on top of routine maintenance.

7 ft Flexible Hose Brush 15 mm Tube Brush Soft Nylon Bristles Reusable
Note: This listing includes the two cleaning brushes only. The CPAP machine, tubing, mask, humidifier and other accessories are not included.

Do not use these brushes on mask vents or memory foam cushions. Vent holes are precision-sized and brushing can enlarge or damage them; memory foam cushions such as the AirTouch F20 and AirTouch N30i must never be soaked or scrubbed. Use CPAP mask wipes on cushions instead, and see the safety notice below.
Reaches the Full Hose
The 7 ft (2.1 m) flexible brush travels the entire length of a standard 6 ft hose with length to spare, so buildup has nowhere left to hide.
One for the Hose, One for the Rest
The long brush does the tubing; the short 15 mm brush gets into elbows, connectors and humidifier outlets, where the long one is unwieldy.
Gentle on Tubing
Soft nylon bristles clean thoroughly without scratching or damaging the interior of your hoses and connectors.
Bends Where You Need It To
A flexible wire core lets the brush navigate curved hoses and awkward, hard-to-reach areas with ease.

Key Features

✓
Wide Compatibility — Suits most CPAP, APAP and BiPAP tubing, elbows and connectors.
✓
7 ft (2.1 m) Flexible Hose Brush — Reaches the full length of a standard 6 ft hose, with length left to hold.
✓
15 mm Tube Brush — For slimline tubing, mask elbows, connectors and humidifier outlets.
✓
Soft Nylon Bristles — Cleans thoroughly without scratching or damaging tubing interiors.
✓
Flexible Wire Core — Easily navigates curved hoses and hard-to-reach areas.
✓
Two Brushes, Two Jobs — A long brush for the hose and a short one for everything too narrow or fiddly for it.
✓
Especially Useful with a Humidifier — Humidified air keeps tubing damp overnight, which is where residue and film build up.
✓
Reusable & Durable — Designed for repeated use, washed and dried between cleans.
✓
Extends Tubing Life — Cleaner tubing stays clear and flexible for longer, so it needs replacing less often.
✓
Not for Vents or Foam — Keep brushes away from mask vent holes and memory foam cushions.*

*Mask vent holes are precision-sized and control how exhaled air leaves the mask — brushing can enlarge or damage them. Memory foam cushions must never be soaked or scrubbed. Use CPAP mask wipes for cushions.

Technical Specifications

Specification Details
Product Type CPAP Hose Cleaning Brush Kit
Pieces in Kit 2 — one long flexible hose brush, one short tube brush
Long Brush Length 7 ft (2.1 m)
Long Brush Head Diameter [CONFIRM — this is the spec that tells customers it fits their hose]
Short Brush Diameter 15 mm
Compatible Tubing Standard 22 mm CPAP tubing (long brush) and 15 mm slimline tubing (short brush)
Bristle Material Soft Nylon
Core Material Flexible Stainless Steel Wire
Compatibility Most CPAP, APAP & BiPAP tubing, elbows and connectors
Not Suitable For Mask vent holes, memory foam cushions, machine air outlets
Heated Tubing Check your tubing's own instructions first — heated hoses contain a heating element
Reusable Yes — rinse, dry and store between uses
Recommended Cleaning Frequency Weekly for tubing, or more often if you use a humidifier
Intended Use Cleaning CPAP tubing, elbows and connectors
Included in Package 7 ft flexible hose brush, 15 mm tube brush

📏 Which Brush for What?

Two brushes, two jobs. The long one is for the hose; the short one is for everything too narrow or too fiddly to reach with it.

7 ft brush → the hose itself 15 mm brush → slimline tubing & connectors
  • Standard tubing (ResMed, Philips, most machines, usually sold as 22 mm) — use the long 7 ft flexible brush
  • Slimline tubing (ResMed SlimLine and similar narrow hoses) — the 15 mm brush is sized for these
  • Mask elbows, swivels and connectors — the 15 mm brush; the long brush is unwieldy for short parts
  • Humidifier chamber outlets and tube ports — the 15 mm brush reaches these too
  • A hose is named by its connector size (22 mm), while a brush is sized to the bore it travels down, so the numbers won't match — that's normal
  • Not sure which tubing you have? Slimline is noticeably narrower and lighter. If in doubt, ask us

Compatibility

  • Standard 22 mm CPAP tubing — ResMed, Philips, BMC, Fisher & Paykel and most others
  • 15 mm slimline tubing, including ResMed SlimLine
  • Mask elbows, swivels and connectors
  • Humidifier chamber outlets and tube ports
  • Mask vent holes — precision-sized; brushing can enlarge or damage them
  • Memory foam cushions (AirTouch F20, AirTouch N30i and similar) — never soak or scrub foam
  • Silicone cushion sealing membranes — wash these by hand, not with a brush
  • The inside of your CPAP machine or its air outlet
  • Heated tubing, unless that tubing's own instructions permit brushing

If you use heated tubing such as a ClimateLineAir, check the tubing's own cleaning instructions before brushing it — heated hoses carry a heating element along the wall.

How to Clean Your Hose

Five minutes, once a week. Do it in the morning so the hose has all day to dry.

  • 1
    Disconnect everythingUnplug the machine, then detach the hose from both the machine or humidifier and the mask. Set the mask aside — it is washed separately, by hand.
  • 2
    Fill a sink with warm soapy waterUse warm water and a few drops of mild, unscented washing-up liquid. No bleach, no antibacterial gel, no vinegar unless your tubing's instructions allow it.
  • 3
    Run the long brush through the hoseSubmerge the hose, feed the 7 ft brush in one end and push it through to the other, then draw it back. Two or three passes is plenty — let the bristles do the work rather than forcing it.
  • 4
    Use the 15 mm brush on the narrow partsWork it into the hose cuffs, your mask elbow and the humidifier outlet. Keep well away from the mask's vent holes.
  • 5
    Rinse thoroughlyFlush the hose through with clean warm water until no soap remains. Residue left inside causes a smell and can irritate your airway.
  • 6
    Hang it up to dryHang the hose in a loop over a door, a shower rail or the back of a chair so water runs out of both ends. Keep it out of direct sunlight, and make sure it is completely dry before reconnecting.

Never reconnect damp tubing — trapped moisture is exactly what you were cleaning out, and it will be back within days.

🔧 Keep It Clean — Complete the Setup

Brushes handle the tubing. The cushion, the filter and the water chamber each need something different.

🧼 Caring for Your Brush Kit

A little care after each use keeps the brushes themselves hygienic and ready for the next clean — a brush left damp in a drawer defeats the point.

  • Rinse both brushes thoroughly under warm running water immediately after each use.
  • Gently shake out excess water and remove any trapped debris from the bristles.
  • Allow the brushes to air dry completely before storing — never put them away damp.
  • Store in a clean, dry place away from direct sunlight between uses.
  • Do not use bleach or harsh chemical cleaners on the bristles or wire core.
  • Don't coil the long brush tightly — a kinked wire core will snag inside the hose.
  • Replace either brush if the bristles become frayed or matted, or the wire core becomes bent or damaged.

Why Choose This Cleaning Brush Kit?

Moisture and residue build up inside CPAP tubing and connectors even with a good rinse, because a splash of water can't reach the full length of the hose — it runs along the bottom and leaves the rest untouched. With a 7 ft flexible brush for the tubing and a 15 mm brush for elbows and connectors, this kit gives you a practical way to get right inside every part of your setup. Regular use supports better hygiene and extends the working life of your tubing, so you replace it less often.

  • The inside of your hose has gone cloudy or filmy
  • There's a stale or musty smell at the mask in the morning
  • You use a humidifier, so the tubing is damp all night
  • You live in a hard-water area and see deposits inside the hose
  • You've been rinsing the hose through and want to clean it properly
  • You've had a cold or chest infection and want to reset your kit
  • You'd rather clean tubing than keep buying replacements

⚠ Important Notice

This listing includes the two cleaning brushes only. The CPAP machine, tubing, mask, humidifier and other accessories are not included and are sold separately. The kit is suitable for most standard 22 mm and 15 mm slimline CPAP tubing.

Do not use these brushes on:

  • Mask vent holes — these are precision-sized and control how exhaled air leaves the mask. Brushing can enlarge or damage them, which affects how the mask clears exhaled air. Never poke anything into a vent.
  • Memory foam cushions such as the AirTouch F20 or AirTouch N30i — foam must never be soaked, scrubbed or washed. Wipe only, with CPAP mask wipes.
  • Silicone cushion sealing membranes — wash these gently by hand instead.
  • The inside of your CPAP machine or its air outlet.
  • Heated tubing, unless that tubing's own instructions permit brushing — heated hoses contain a heating element along the wall.

Always disconnect and switch off your machine before cleaning. Rinse the brushes thoroughly after each use and allow them to air dry completely before storing, and make sure tubing is fully dry before reconnecting it. Regular cleaning of CPAP equipment is recommended to help maintain hygiene, support therapy performance and extend the lifespan of your accessories. Follow your equipment manufacturer's own cleaning instructions where they differ from the above. If you notice any change in tubing condition or airflow after cleaning, stop using that tubing and consult your CPAP provider or healthcare professional.

Warranty T & C

🛡️ For Machines : Every eligible product you purchase is backed by a 2-year manufacturer warranty, covering manufacturing defects and workmanship under normal use.

⚠️ For Masks & Accessories : CPAP
masks and mask components are covered by a 6-month warranty against
manufacturing defects only.

*Not covered: Normal wear and tear, misuse, improper cleaning, accidental
damage, or unauthorised modifications.

📖 Read More — To view our detailed Warranty policy

Shipping & Return Policy

🚚 Free Next-Day UK Delivery : Orders placed before 3:00 PM GMT, Monday to Friday, are dispatched the same day using our next-day delivery service.

📖 Read More — To view our detailed Shipping policy

↩️ 30-Day Easy Returns : We offer a 30-day return policy on eligible items that are unused, unopened, and in their original sealed packaging. For hygiene and safety reasons, opened or used CPAP Machines, masks, cushions, and other personal-use accessories cannot be returned or replaced.

📖 Read More — To view our detailed Returns & Exchange policy

Frequently Asked Questions

Q1. What is the purpose of a CPAP hose cleaning brush kit?
A. This kit is designed to clean the inside of CPAP hoses, masks, and connectors by removing dust, moisture, and buildup that regular rinsing may not fully eliminate, helping maintain hygiene and equipment performance.

Q2. Will this cleaning brush fit all CPAP hoses?
A. Yes, it is designed for universal compatibility with most CPAP, APAP, and BiPAP systems. It includes brushes for both 15 mm slimline hoses and 19 mm standard hoses, making it suitable for most setups.

Q3. Is the brush safe for my CPAP tubing and mask?
A. Yes, the brushes use soft nylon bristles that clean effectively without scratching or damaging the interior of the tubing, mask elbows, or connectors.

Q4. How often should I use the CPAP cleaning brush?
A. It is recommended to use the brush regularly along with routine cleaning—typically weekly or as needed depending on usage—to maintain hygiene and keep your CPAP equipment performing at its best.

View full details
CPAP Hose Cleaning Brush Kit - 7ft Long, 15mm/19mm Diameter
CPAP Hose Cleaning Brush Kit - 7ft Long, 15mm/19mm Diameter £13.99