ResLab Medicals

AirFit F20 Replacement Headgear with Magnetic Clips

£11.99
Skip to product information
1 of 10

Only 69 left - Hurry! Limited stock left.

ResLab Medicals

AirFit F20 Replacement Headgear with Magnetic Clips

AirFit F20 Replacement Headgear with Magnetic Clips

Regular price £11.99 with VAT Relief
Sale price £11.99 Regular price with VAT Relief
Sale Sold out
This product qualifies for VAT relief. Simply check the VAT Relief box in your cart, and the VAT will be automatically deducted. Read more...

Description

ResMed

Replacement Headgear with Magnetic Clips for ResMed AirFit™ F20

📦 What's Included

  • 1 × Replacement Headgear for ResMed AirFit™ F20 (Standard size)
  • 2 × Magnetic Headgear Clips

The mask frame, cushion, elbow, tubing and CPAP machine are not included.

Comfortable, Secure Headgear for Your Full Face Mask — Standard Size

Restore the comfort and stability of your CPAP mask with the Replacement Headgear with Magnetic Clips for the ResMed AirFit™ F20 Full Face Mask. Designed to provide a secure, personalised fit, this replacement headgear helps maintain proper mask positioning while reducing leaks during therapy.

Headgear is the quiet cause of most "my mask suddenly started leaking" problems. The straps hold their tension for months and then slowly give, and because it happens gradually you compensate by tightening — which is why stretched straps usually show up as red marks and sore spots before you notice the leak. If a new cushion hasn't fixed your fit, the headgear is almost always the part that has gone.

Made from soft, breathable fabric, it offers lasting comfort for nightly use without excessive pressure on the face or head. Hook-and-loop (Velcro) straps let you dial the fit in precisely, while the included magnetic clips make attaching and removing the mask quick and effortless — without undoing the settings you've already got right.

Supplied in Standard size.

Genuine ResMed Magnetic Clips Included Hook-and-Loop Adjustment Standard Size AirFit™ F20
Contains magnets: This headgear uses magnetic clips. Keep them at least 6 inches (150 mm) away from implanted medical devices such as pacemakers, ICDs, shunts and other implants that may be affected by magnetic fields. If you or anyone sharing your bed has such a device, read the magnet safety notice below before ordering — a non-magnetic (NM) version of the F20 is available.

Note: This listing includes the headgear and magnetic clips only. The mask frame, cushion, elbow, tubing and CPAP machine are not included and are sold separately.
Secure Mask Support
Helps keep the mask properly positioned throughout the night, reducing leaks and disruptions to your therapy.
On and Off in Seconds
The included magnetic clips allow quick attachment and removal without undoing the strap settings each time.
Soft on Skin, All Night
Soft, breathable fabric is gentle on the skin, offering lasting comfort without excessive pressure on the face or head.
Dial In Your Fit
Hook-and-loop straps adjust in fine increments, so you can set the tension precisely rather than in fixed steps.

Key Features

✓
Genuine ResMed Part — Built to the exact specification of the AirFit F20, so strap lengths and clip fit are correct.
✓
For the ResMed AirFit™ F20 — A direct replacement for the F20 full face mask system.
✓
Magnetic Clips Included — Two clips supplied, for quick attachment and removal.*
✓
Hook-and-Loop Adjustment — Velcro straps adjust in fine increments for a precise, personalised fit.
✓
Soft & Breathable Fabric — Gentle on the skin and hair for enhanced overnight comfort.
✓
Even Tension Distribution — Spreads the load across the head rather than concentrating it on the cheeks.
✓
Standard Size — The size supplied with most F20 masks; see the sizing note below if yours runs small.
✓
Hand Washable — Washes in warm soapy water; no machine wash or tumble dry.
✓
Latex Free — Suitable for users with a latex sensitivity.
✓
Cheaper Than a New Mask — Keeps your existing frame, cushion and elbow in service.

*The magnetic clips are the magnetic component of the F20 mask system. See the magnet safety notice below — and if magnets are contraindicated for you, ask us about the non-magnetic (NM) F20 instead.

Technical Specifications

Specification Details
Manufacturer ResMed
Product Type Replacement Headgear with Magnetic Clips
Part Category Genuine ResMed Replacement Part
Compatible Mask ResMed AirFit™ F20 Full Face CPAP Mask
Available Size Standard (For Her sizing is available on our separate F20 headgear listing)
Adjustment Hook-and-Loop (Velcro) Straps
Attachment 2 × Magnetic Clips
Material Soft Breathable Fabric
Contains Magnets Yes* — 2 magnetic headgear clips
Minimum Magnet Distance Keep at least 6 inches (150 mm) from implanted medical devices
Non-Magnetic Alternative Available — ResMed AirFit™ F20 NM
Latex Free Yes
Washable Hand wash only — no machine wash or tumble dry
Reusable Yes
Recommended Replacement Every 6 months, or sooner if the straps stretch or stop holding adjustment
Compliance CE Marked, EU MDR Compliant
Intended Use Component of a full face mask for the treatment of Obstructive Sleep Apnoea (OSA) in Adults
Included in Package 1 × Headgear (Standard), 2 × Magnetic Clips

📏 Standard Size — Will It Fit You?

This headgear is supplied in Standard, which is the size most F20 masks ship with. A smaller "For Her" cut exists for narrower head shapes.

Standard — this listing For Her — see our other F20 headgear
  • Replacing worn headgear? Check the size printed on the strap — if it says Standard, this is your part
  • If your current straps are nearly fully tightened just to hold a seal, the smaller For Her cut will likely suit you better
  • If they're nearly fully loosened and still feel tight, Standard is right
  • "For Her" is a size, not a requirement — order whichever fits, regardless of gender
  • See our F20 headgear in Standard and For Her if you'd rather choose between both

Compatibility

  • ResMed AirFit™ F20 Full Face Mask
  • ResMed AirFit™ F20 For Her Full Face Mask (this is the Standard-size headgear)
  • Your existing F20 frame, cushion and elbow
  • ResMed AirFit™ F30i / F30 / F40 — different platforms
  • ResMed AirFit™ N20 / AirTouch™ N20 (nasal)
  • ResMed AirFit™ N30i / P30i / P10
  • Philips, BMC, Fisher & Paykel and other non-ResMed mask systems

Headgear is not interchangeable between ResMed mask families — strap lengths and clip fittings differ. Check the model printed on your frame before ordering. Using an AirTouch F20? Get in touch before ordering and we'll confirm the right headgear for your mask.

💡 Fitting Tip — Reset Your Tension

New headgear holds far more tension than the stretched set you're taking off, so your old settings will be much too tight. Start from scratch.

  • Loosen all four straps fully before the first night
  • Put the mask on lying down, in your usual sleeping position, with the machine running
  • Tighten in small, even steps until the leak stops — then stop, even if it still feels loose
  • Keep both sides even; an uneven pull tilts the frame and opens a leak at the opposite corner
  • Hook-and-loop straps adjust finely, so make smaller changes than you think you need
  • Use the magnetic clips to take the mask on and off, rather than loosening the straps each time
  • Over-tightening is the leading cause of red marks and, on a full face mask, of air leaking into the eyes

🔧 Complete the Rebuild

If the straps have gone, the rest of the mask is the same age. These are the other three parts of an F20, each on its own schedule.

🧼 Cleaning Instructions

Fabric headgear lasts longest with gentle hand washing. Heat and machine agitation are what destroy the elastic.

  • Leave the magnetic clips attached to the straps unless your user guide says otherwise — they wash with the headgear.
  • Hand wash weekly in warm water with a mild, non-abrasive, unscented soap.
  • Rinse thoroughly to remove all soap residue, which is a common cause of skin irritation.
  • Gently squeeze out excess water — do not wring or twist, which stretches the elastic.
  • Lay flat to air dry away from direct sunlight and never on a radiator; heat is what kills the stretch.
  • Do not machine wash, tumble dry, iron, or use alcohol-based cleaners, bleach or fabric conditioner.
  • While drying, keep the magnetic clips away from phones, laptops, bank cards, hearing aids and other magnets.
  • Check the hook-and-loop strips weekly and pick out trapped hair, which stops them gripping properly.
  • Replace the headgear when it becomes stretched or worn, or no longer holds its adjustment securely.

Why Choose This Replacement Headgear?

Stretched or worn headgear is one of the most common causes of mask leaks, since it's the straps that hold your frame and cushion firmly in place all night. As a genuine ResMed component built for the AirFit F20, this replacement restores the even, adjustable fit the mask was designed around, along with the quick on-and-off convenience of the magnetic clips. Since your existing frame, cushion and elbow all connect to it as normal, it's a simple, targeted fix rather than a full mask replacement.

  • The straps no longer hold their adjustment and creep loose overnight
  • You're tightening further each week just to hold a seal
  • A new cushion didn't fix the leak
  • You're waking with red marks or sore spots from over-tightening
  • The fabric is bobbled, frayed, stretched or permanently discoloured
  • The hook-and-loop strips have stopped gripping, usually from trapped hair
  • A magnetic clip is cracked, bent or no longer snaps home firmly
  • It's simply been 6 months since the last change

⚠ Magnet Safety Notice — Read Before Ordering

This headgear contains magnets. Keep the magnetic clips at least 6 inches (150 mm) away from implanted medical devices and metallic implants that may be affected by magnetic fields — at all times, including when handling, storing or drying the headgear.

Consult your doctor before use if you, or anyone who shares your bed or helps you fit the mask, has any of the following:

  • A pacemaker, implantable cardioverter-defibrillator (ICD) or other cardiac device
  • A shunt valve, neurostimulator or implanted drug-delivery pump
  • Metallic haemostatic clips, particularly in the head
  • A metallic splinter in the eye, or metallic cranial or ocular implants
  • A cochlear implant, magnetic hearing aid or magnetic dental implant
  • Any other implanted metallic or magnetically sensitive device

This is not a complete list. ResMed produces a non-magnetic (NM) version of the F20 for users with contraindications to magnet exposure — contact us if you need it, and see its user guide in the documents section below. Read the magnet contraindications document before use, follow your healthcare provider's guidance, and keep the clips away from bank cards, phones, laptops and other magnetically sensitive items.

⚠ Important Safety Notice

This headgear is a component of a medical device intended for use as part of a complete, compatible AirFit F20 full face mask system used for the treatment of obstructive sleep apnoea. This listing includes the headgear and magnetic clips only — the mask frame, cushion, elbow, tubing and CPAP machine are not included and are sold separately.

Before use, confirm the headgear is compatible with your existing frame and cushion, and inspect it regularly for stretched fabric, frayed edges, or clips that no longer hold securely. Do not over-tighten the straps to stop a leak; a leak that only tightening can fix usually means a worn cushion or the wrong size. Replace the headgear when it becomes stretched or worn, to maintain a secure fit and effective therapy. If you notice persistent leaks, discomfort or any change in mask performance after fitting, discontinue use and consult your CPAP provider or healthcare professional.

Warranty T & C

🛡️ For Machines : Every eligible product you purchase is backed by a 2-year manufacturer warranty, covering manufacturing defects and workmanship under normal use.

⚠️ For Masks & Accessories : CPAP
masks and mask components are covered by a 6-month warranty against
manufacturing defects only.

*Not covered: Normal wear and tear, misuse, improper cleaning, accidental
damage, or unauthorised modifications.

📖 Read More — To view our detailed Warranty policy

Shipping & Return Policy

🚚 Free Next-Day UK Delivery : Orders placed before 3:00 PM GMT, Monday to Friday, are dispatched the same day using our next-day delivery service.

📖 Read More — To view our detailed Shipping policy

↩️ 30-Day Easy Returns : We offer a 30-day return policy on eligible items that are unused, unopened, and in their original sealed packaging. For hygiene and safety reasons, opened or used CPAP Machines, masks, cushions, and other personal-use accessories cannot be returned or replaced.

📖 Read More — To view our detailed Returns & Exchange policy

Frequently Asked Questions

Q1: Is this headgear compatible with both AirFit™ F20 and AirTouch™ F20 masks?
A: Yes. The Replacement ResLab AirFit™ F20 Headgear is compatible with both AirFit™ F20 and AirTouch™ F20 Full Face CPAP Masks, ensuring a secure and comfortable fit.

Q2: Are the magnetic clips included with the headgear?
A: Yes. This replacement kit includes 1 × ResLab AirFit™ F20 Headgear and 2 × Magnetic Clips for quick and secure mask attachment.

Q3: Can I adjust the headgear for a better fit?
A: Yes. The adjustable straps allow you to customize the fit to your head size and preferred comfort level, helping maintain a stable mask seal throughout the night.

Q4: How do I clean the AirFit™ F20 Headgear?
A: Hand wash the headgear regularly using warm water and mild soap. Rinse thoroughly and allow it to air dry completely before use. Regular cleaning helps maintain hygiene, comfort, and the lifespan of the headgear.

View full details
AirFit F20 Replacement Headgear with Magnetic Clips
AirFit F20 Replacement Headgear with Magnetic Clips £11.99